Unlock Microcontroller ATTINY2313 Binary

Unlock Microcontroller ATTINY2313 means the protection of the MCU program and data which has been contained inside the memory has been disable and Binary or heximal can be readout;

Unlock Microcontroller ATTINY2313 means the protection of the MCU program and data which has been contained inside the memory has been disable and Binary or heximal can be readout;

Unlock Microcontroller ATTINY2313 means the protection of the MCU program and data which has been contained inside the memory has been disable and Binary or heximal can be readout;

Port B is a 6-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port B output buffers have symmetrical drive characteristics with both high sink and source capability.

As inputs, Port B pins that are externally pulled low will source current if the pull-up resistors are activated. The Port B pins are tri-stated when a reset condition becomes active, even if the clock is not running.

On the ATtiny25 device the programmable I/O ports PB3 and PB4 (pins 2 and 3) are exchanged in the ATtiny15 compatibility mode for supporting the backward compatibility with ATtiny2313.

Reset input. A low level on this pin for longer than the minimum pulse length will generate a reset, even if the clock is not running.

1. For compatibility with future devices, reserved bits should be written to zero if accessed. Reserved I/O memory addresse should never be written.

2. I/O Registers within the address range 0x00 – 0x1F are directly bit-accessible using the SBI and CBI instructions. In these registers, the value of single bits can be checked by using the SBIS and SBIC instructions.

3. Some of the Status Flags are cleared by writing a logical one to them. Note that, unlike most other AVRs, the CBI and SBI instructions will only operation the specified bit, and can therefore be used on registers containing such Status Flags. The CBI and SBI instructions work with registers 0x00 to 0x1F only.

1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities.

2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also Halide free and fully Green.

1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities.

2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive). Also Halide free and fully Green


Tags: ,,,,,,,,,,,