IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

We can Pull Microprocessor IC Microchip PIC12LF1552 firmware out from its memory, please view the chip features for your reference:

– DC – 32 MHz clock input

– DC – 125 ns instruction cycle

· Interrupt Capability with Automatic Context

Saving

· 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset

· Direct, Indirect and Relative Addressing modes:

– Two full 16-bit File Select Registers (FSRs)

– FSRs can read program and data memory

Flexible Oscillator Structure:

· 16 MHz Internal Oscillator Block:

– Factory calibrated to ±1%, typical

– Software selectable frequency range from 32 MHz to 31 kHz

· 4x Phase-Lock Loop (PLL), usable with 16 MHz internal oscillator

– Allows 32 MHz software selectable clock frequency

· 31 kHz Low-Power Internal Oscillator

· Three External Clock modes up to 20 MHz

Special Microcontroller Features:

· Operating Voltage Range:

– 1.8V to 3.6V

· Self-Programmable under Software Control

· Power-on Reset (POR)

· Power-up Timer (PWRT)

· Programmable Low-Power Brown-Out Reset (LPBOR)

· Extended Watchdog Timer (WDT):

– Programmable period from 1 ms to 256s

· Programmable Code Protection

· In-Circuit Serial Programming™ (ICSP™) via Two Pins

· Enhanced Low-Voltage Programming (LVP)

· Power-Saving Sleep mode:

– Low-Power Sleep mode

– Low-Power BOR (LPBOR)

· Integrated Temperature Indicator

· 128 Bytes High-Endurance Flash:

– 100,000 write Flash endurance (minimum)

– 30 mA/MHz @ 1.8V, typical

Peripheral Features:

· Analog-to-Digital Converter (ADC):

– 10-bit resolution

– 5 external channels

– 2 internal channels:

– Fixed Voltage Reference

– Temperature Indicator channel

– Auto acquisition capability

– Conversion available during Sleep

– Special Event Triggers

– Conversion available during Sleep

· Hardware Capacitive Voltage Divider (CVD)

– Double sample conversions

– Two result registers

– Inverted acquisition

– 7-bit pre-charge timer

– 7-bit acquisition timer

– Two guard ring output drives

– Adjustable sample and hold capacitor array

· Voltage Reference module:

– Fixed Voltage Reference (FVR) with 1.024V and 2.048V output levels

· 6 I/O Pins (1 Input-only Pin):

– High current sink/source 25 mA/25 mA

– Individually programmable weak pull-ups

– Individually programmable interrupt-on-change (IOC) pins

· Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler

· Master Synchronous Serial Port (MSSP) with SPI and I2CTM with:

– 7-bit address masking

– SMBus/PMBusTM compatibility

Tags: pull microprocessor ic binary data,pull microprocessor ic dump information,pull microprocessor ic embed firmware,pull microprocessor ic encrypt program,pull microprocessor ic flash content,pull microprocessor ic heximal file,pull microprocessor ic protect eprom,pull microprocessor ic software memory,pull microprocessor ic source code