Hack ATMEL ATXMEGA128A1 8/16-bit XMEGA A1 Microcontroller

We can CRACK MCU ATXMEGA128A1 8/16-bit XMEGA A1 Microcontroller, please view the IC chip features for your reference:


· High-performance, Low-power 8/16-bit AVR XMEGA Microcontroller

· Non-Volatile Program and Data Memories

64K – 384K Bytes of In-System Self-Programmable Flash

4K – 8K Bytes Boot Section with Independent Lock Bits

2K – 4K Bytes EEPROM

4K – 32K Bytes Internal SRAM

External Bus Interface for up to 16M bytes SRAM

External Bus Interface for up to 128M bit SDRAM

Peripheral Features

– Four-channel DMA Controller with support for external requests

– Eight-channel Event System

– Eight 16-bit Timer/Counters

Four Timer/Counters with 4 Output Compare or Input Capture channels

Four Timer/Counters with 2 Output Compare or Input Capture channels

High-Resolution Extension on all Timer/Counters

Advanced Waveform Extension on two Timer/Counters

Eight USARTs

IrDA modulation/demodulation for one USART

– Four Two-Wire Interfaces with dual address match (I2C and SMBus compatible)

– Four SPI (Serial Peripheral Interface) peripherals

AES and DES Crypto Engine

– 16-bit Real Time Counter with separate Oscillator

– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters

– Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters

– Four Analog Comparators with Window compare function

– External Interrupts on all General Purpose I/O pins

– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator

Special Microcontroller Features

– Power-on Reset and Programmable Brown-out Detection

– Internal and External Clock Options with PLL and Prescaler

– Programmable Multi-level Interrupt Controller

– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby

– Advanced Programming, Test and Debugging Interfaces

JTAG (IEEE 1149.1 Compliant) Interface for programming, test and debugging

PDI (Program and Debug Interface) for programming and debugging

I/O and Packages

– 78 Programmable I/O Lines

– 100 – lead TQFP

– 100 – ball CBGA

Operating Voltage

– 1.6 – 3.6V

Speed performance

– 0 – 12 MHz @ 1.6 – 3.6V

– 0 – 32 MHz @ 2.7 – 3.6V

Tags: ,,,,,,,,