IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

We can Extract Microcontroller PIC18F6620 Heximal, please view the Microcontroller PIC18F6620 features for your reference:

Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except Microcontroller).

Default assignment when CCP2MX is set.

External memory interface functions are only available on PIC18F8X20 devices.

CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is multiplexed with either RB3 or RC1 when Extract Microcontroller .

PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices.

AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for proper operation of the part in user or ICSP modes. See parameter D001A for details.

Note 1:

Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except Microcontroller) if Extract Microcontroller .

Default assignment when CCP2MX is set.

External memory interface functions are only available on PIC18F8X20 devices.

CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is multiplexed with either RB3 or RC1 before Extract Microcontroller .

PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices.

AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for proper operation of the part in user or ICSP modes. See parameter D001A for details.

Note 1:

Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except Microcontroller).

Default assignment when CCP2MX is set after Extract Microcontroller .

External memory interface functions are only available on PIC18F8X20 devices.

CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is multiplexed with either RB3 or RC1.

PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices if Extract Microcontroller .

AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for proper operation of the part in user or ICSP modes. See parameter D001A for details.

Note 1:

Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except Microcontroller).

Default assignment when CCP2MX is set.

External memory interface functions are only available on PIC18F8X20 devices when Extract Microcontroller .

CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is multiplexed with either RB3 or RC1.

PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices.

AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for proper operation of the part in user or ICSP modes. See parameter D001A for details after Extract Microcontroller .

Note 1:

Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except Microcontroller).

Default assignment when CCP2MX is set.

External memory interface functions are only available on PIC18F8X20 devices before Extract Microcontroller .

CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is multiplexed with either RB3 or RC1.

PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices.

AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for proper operation of the part in user or ICSP modes. See parameter D001A for details.

Note 1:

Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except Microcontroller).

Default assignment when CCP2MX is set if Extract Microcontroller .

External memory interface functions are only available on PIC18F8X20 devices.

CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is multiplexed with either RB3 or RC1.

PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices when Extract Microcontroller .

AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for

proper operation of the part in user or ICSP modes. See parameter D001A for details before Extract Microcontroller .