Extract Microcontroller PIC16F677 Code

Extract Microcontroller PIC16F677 Code from its flash memory in the format of binary or heximal, and copy microcontroller PIC16F677 program into blank MCU as exactly IC Clone;

Extract Microcontroller PIC16F677 Code from its flash memory in the format of binary or heximal, and copy microcontroller PIC16F677 program into blank MCU as exactly IC Clone

Extract Microcontroller PIC16F677 Code from its flash memory in the format of binary or heximal, and copy microcontroller PIC16F677 program into blank MCU as exactly IC Clone

Low-Power Features:

· Standby Current:

– 50 nA @ 2.0V, typical

· Operating Current:

– 11 ìA @ 32 kHz, 2.0V, typical

– 220 ìA @ 4 MHz, 2.0V, typical

· Watchdog Timer Current:

– <1 ìA @ 2.0V, typical

Peripheral Features:

· 17 I/O pins and 1 input only pin:

– High current source/sink for direct LED drive

– Interrupt-on-Change pin

– Individually programmable weak pull-ups

– Ultra Low-Power Wake-up (ULPWU)

· Analog Comparator module with:

– Two analog comparators

– Programmable on-chip voltage reference (CVREF) module (% of VDD) if unlock ic attiny861 Microcontroller

– Comparator inputs and outputs externally accessible

– SR Latch mode

– Timer 1 Gate Sync Latch

– Fixed 0.6V VREF

· A/D Converter:

– 10-bit resolution and 12 channels

· Timer0: 8-bit timer/counter with 8-bit programmable prescaler

· Enhanced Timer1:

– 16-bit timer/counter with prescaler

– External Timer1 Gate (count enable)

– Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator if INTOSC mode selected

· Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

· Enhanced Capture, Compare, PWM+ module:

– 16-bit Capture, max resolution 12.5 ns

– Compare, max resolution 200 ns

– 10-bit PWM with 1, 2 or 4 output channels, programmable “dead time”, max frequency 20 kHz

– PWM output steering control before Extract atmel ic attiny261 Microcontroller

· Synchronous Serial Port (SSP):

– SPI mode (Master and Slave)

· I2C™ (Master/Slave modes):

– I2C™ address mask

· In-Circuit Serial ProgrammingTM (ICSPTM) via two pins

Circuit Engineering Company Limited continues to be recognized as the Southern China Leader in Services for IC Read, MCU Crack, Chip Extract, Microcontroller Unlock service. With the advancement of today’s modern circuit board technology, it is more important than ever to have specialists available to help you at a moment’s notice. Our engineering and commercial teams collectively have a vast amount of electronic experience covering field include Consumer Electronics, Industrial Automation Electronics, Wireless Communication Electronics., etc. For more information please contact us through email.


Tags: ,,,,,,,,,