Extract IC PIC18F6520 Firmware

We can Extract IC PIC18F6520 Firmware, please view the IC PIC18F6520 features for your reference:

High-Performance RISC CPU:

· C compiler optimized architecture/instruction set:

– Source code compatible with the PIC16 and PIC17 instruction sets

· Linear program memory addressing to 128 Kbytes when Extract IC 

· Linear data memory addressing to 3840 bytes

· 1 Kbyte of data EEPROM

· Up to 10 MIPs operation:

– DC – 40 MHz osc./clock input if Extract IC 

– 4 MHz – 10 MHz osc./clock input with PLL active

· 16-bit wide instructions, 8-bit wide data path

· Priority levels for interrupts

· 31-level, software accessible hardware stack

· 8 x 8 Single Cycle Hardware Multiplier before Extract IC

External Memory Interface (PIC18F8X20 Devices Only):

· Address capability of up to 2 Mbytes

· 16-bit interface

High current sink/source 25 mA/25 mA

Four external interrupt pins

Timer0 module: 8-bit/16-bit timer/counter after Extract IC 

Timer1 module: 16-bit timer/counter

Timer2 module: 8-bit timer/counter

Timer3 module: 16-bit timer/counter

Timer4 module: 8-bit timer/counter

Secondary oscillator clock option – Timer1/Timer3

Five Capture/Compare/PWM (CCP) modules:

– Capture is 16-bit, max. resolution 6.25 ns (TCY/16) if Extract IC 

– Compare is 16-bit, max. resolution 100 ns (TCY)

– PWM output: PWM resolution is 1 to 10-bit

· Master Synchronous Serial Port (MSSP) module with two modes of operation:

– 3-wire SPI™ (supports all 4 SPI modes)

– I2C™ Master and Slave mode

· Two Addressable USART modules:

– Supports RS-485 and RS-232 when Extract IC 

· Parallel Slave Port (PSP) module

Analog Features:

· 10-bit, up to 16-channel Analog-to-Digital Converter (A/D):

– Conversion available during Sleep

· Programmable 16-level Low-Voltage Detection (LVD) module:

– Supports interrupt on Low-Voltage Detection after Extract IC

· Programmable Brown-out Reset (PBOR)

· Dual analog comparators:

– Programmable input/output configuration

Special Microcontroller Features:

· 100,000 erase/write cycle Enhanced Flash program memory typical

· 1,000,000 erase/write cycle Data EEPROM memory typical before Extract IC 

· 1 second programming time

· Flash/Data EEPROM Retention: > 40 years

· Self-reprogrammable under software control

· Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

 Watchdog Timer (WDT) with its own On-Chip RC Oscillator for reliable operation

· Programmable code protection

· Power saving Sleep mode if Extract IC

· Selectable oscillator options including:

– 4X Phase Lock Loop (of primary oscillator)

– Secondary Oscillator (32 kHz) clock input

· In-Circuit Serial Programming™ (ICSP™) via two pins

· MPLAB® In-Circuit Debug (ICD) via two pins

This family offers the same advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price – with the addition of high endurance Enhanced Flash program memory. The PIC18FXX20 family also provides an enhanced range of program memory options and versatile analog features that make it ideal for complex, high-performance applications when Extract IC.


Tags: ,,,,,,,,,