Decrypt Microcontroller PIC18F2423 Heximal

We can decrypt microcontroller PIC18F2423 heximal, please view the microcontroller PIC18F2423 features for your reference:

12-bit,up to 13-channel Analog-to-Digital
Converter module (A/D):
– Auto-acquisition capability
– Conversion available during Sleep
Dualanalog comparators with input multiplexing
High-currentsink/source 25 mA/25 mA
Threeprogrammable external interrupts
Fourinput change interrupts of IC decryption
Upto 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
EnhancedCapture/Compare/PWM (ECCP) module (40/44-pin devices only) when decrypt microcontroller’s heximal:
– One, two or four PWM outputs
– Selectable polarity
– Programmable dead time
– Auto-shutdown and auto-restart
MasterSynchronous Serial Port (MSSP) module supporting 3-wire SPI (all 4 modes) and I2C™
Master and Slave modes
EnhancedUSART module:
– Supports RS-485, RS-232 and LIN 1.2
– RS-232 operation using internal oscillator block (no external crystal required)
– Auto-wake-up on Start bit
– Auto-Baud Detect if the microcontroller heximal can be decrypted
Run:CPU on, peripherals on
Idle:CPU off, peripherals on
Sleep:CPU off, peripherals off
Idlemode currents down to 5.8 ìA, typical
Sleepmode current down to 0.1 ìA, typical
Timer1Oscillator: 1.8 ìA, 32 kHz, 2V
WatchdogTimer: 2.1 ìA
FourCrystal modes, up to 25 MHz
4xPhase Lock Loop (available for crystal and Two-SpeedOscillator Start-up internal oscillators)
TwoExternal RC modes, up to 4 MHz
TwoExternal Clock modes, up to 25 MHz
Internaloscillator block:
– 8 user-selectable frequencies, from 31 kHz to 8 MHz
– Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
– User-tunable to compensate for frequency drift
Secondaryoscillator using Timer1 @ 32 kHz
Fail-SafeClock Monitor:
– Allows for safe shutdown if external clock stops after the microcontroller heximal has been decrypted