Decipher Texas Instruments MCU MSP430G2402

We can CRACK MCU Texas Instruments MSP430G2402IN20 MIXED SIGNAL MICROCONTROLLER, please view the IC chip features for your reference:

 

FEATURES

Low Supply Voltage Range: 1.8 V to 3.6 V

Ultra-Low Power Consumption

– Active Mode: 220 µA at 1 MHz, 2.2 V

– Standby Mode: 0.5 µA

– Off Mode (RAM Retention): 0.1 µA

Five Power-Saving Modes

Ultra-Fast Wake-Up From Standby Mode in

Less Than 1 µs

16-Bit RISC Architecture, 62.5-ns Instruction

Cycle Time

Basic Clock Module Configurations

– Internal Frequencies up to 16 MHz With

Four Calibrated Frequencies

– Internal Very-Low-Power Low-Frequency

(LF) Oscillator

– 32-kHz Crystal

External Digital Clock Source

One 16-Bit Timer_A With Three

Capture/Compare Registers

Up to 16 Touch-Sense Enabled I/O

Universal Serial Interface (USI) Supporting SPI and I2C

10-Bit 200-ksps Analog-to-Digital (A/D)

Converter With Internal Reference,

Sample-and-Hold, and Autoscan

(MSP430G2x32 Only)

Brownout Detector

Serial Onboard Programming,

No External Programming Voltage Needed,

Programmable Code Protection by Security

Fuse

On-Chip Emulation Logic With Spy-Bi-Wire

Interface

Family Members are Summarized in Table 1

Package Options

– TSSOP: 14 Pin, 20 Pin

– PDIP: 20 Pin

– QFN: 16 Pin

For Complete Module Descriptions, See the

MSP430x2xx Family Users Guide (SLAU144)


DESCRIPTION

The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consist of several devices featuring

different sets of peripherals targeted for various applications. The architecture, combined with five low-power

modes is optimized to achieve extended battery life in portable measurement applications. The device features a

powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.

The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430G2x32 and MSP430G2x02 series of microcontrollers are ultra-low-power mixed signal

microcontrollers with built-in 16-bit timers, and up to 16 I/O touch sense enabled pins and built-in communication

capability using the universal serial communication interface. The MSP430G2x32 series have a 10-bit A/D

converter. For configuration details see Table 1. Typical applications include low-cost sensor systems that

capture analog signals, convert them to digital values, and then process the data for display or for transmission

to a host system.


Tags: ,,,,,,,,