Crack Microcontroller PIC16C641 Eeprom

Crack Microcontroller PIC16C641 and recover Eeprom content from secured mcu pic16c641, and copy the firmware of heximal to new microprocessor pic16c641.

Crack Microcontroller PIC16C641 and recover Eeprom content from secured mcu pic16c641, and copy the firmware of heximal to new microprocessor pic16c641
Crack Microcontroller PIC16C641 and recover Eeprom content from secured mcu pic16c641, and copy the firmware of heximal to new microprocessor pic16c641

High Performance RISC CPU:

· Only 35 instructions to learn

· All single-cycle instructions (200 ns), except for program branches which are two-cycle

· Operating speed:

– DC – 20 MHz clock input

– DC – 200 ns instruction cycle

· Interrupt capability

· 8-level deep hardware stack

· Direct, Indirect and Relative addressing modes

Peripheral Features:

· Up to 33 I/O pins with individual direction control

· High current sink/source for direct LED drive

· Analog comparator module with:

– Two analog comparators

– Programmable on-chip voltage reference (VREF) module

– Programmable input multiplexing from device inputs and internal voltage reference

– Comparator outputs can be output signals

· Timer0: 8-bit timer/counter with 8-bit programmable prescaler

Special Microcontroller Features:

break locked microcontroller PIC16C641 flash memory and extract firmware file from flash memory
break locked microcontroller PIC16C641 flash memory and extract firmware file from flash memory

· Power-on Reset (POR)

· Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

· Brown-out Reset

· Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

· Programmable code protection

· Power saving SLEEP mode

· Selectable oscillator options

· Serial in-circuit programming (via two pins)

· Four user programmable ID locations

· Program Memory Parity Error checking circuitry with Parity Error Reset (PER)

· CMOS Technology:

· Low-power, high-speed CMOS EPROM technology

· Fully static design

· Wide operating voltage range: 3.0V to 6.0V

· Commercial, Industrial and Automotive temperature ranges

· Low power consumption

– < 2.0 mA @ 5.0V, 4.0 MHz

– 15 µA typical @ 3.0V, 32 kHz

– < 1.0 µA typical standby current @ 3.0V