Crack MCU PIC16C63A Firmware

Crack MCU PIC16C63A Firmware means the whole content from memory which include flash and eeprom are all completely being extracted and copy microcontroller PIC16C63A program to other blank MCU;

Crack MCU PIC16C63A Firmware means the whole content from memory which include flash and eeprom are all completely being extracted and copy microcontroller PIC16C63A program to other blank MCU

Crack MCU PIC16C63A Firmware means the whole content from memory which include flash and eeprom are all completely being extracted and copy microcontroller PIC16C63A program to other blank MCU

PIC16CXX Microcontroller Core Features:

· High performance RISC CPU

· Only 35 single word instructions to learn

· All single cycle instructions except for program branches which are two cycle

· Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle

· 4 K x 14 words of Program Memory, 192 x 8 bytes of Data Memory (RAM)

· Interrupt capability

· Eight-level deep hardware stack

· Direct, indirect and relative addressing modes

· Power-on Reset (POR)

· Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) if Clone IC dsPIC30F3010

· Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

· Programmable code protection

· Power-saving SLEEP mode crystal/clock

· Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

· Capture, Compare, PWM modules

– Capture is 16-bit, max. resolution is 200 ns

– Compare is 16-bit, max. resolution is 200 ns

– PWM max. resolution is 10-bit

· 8-bit multichannel Analog-to-Digital converter

· Synchronous Serial Port (SSP) with SPITM and I2CTM

· Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI)

· Parallel Slave Port (PSP), 8-bits wide with external RD, WR and CS controls before pull microcomputer microchip dsPIC30F6013

· Brown-out detection circuitry for Brown-out Reset (BOR)

· Selectable oscillator options

· Low power, high speed CMOS EPROM technology

· Wide operating voltage range: 2.5V to 5.5V

· High Sink/Source Current 25/25 mA

· Commercial, Industrial and Automotive temperature ranges

· Low power consumption:

– < 5 mA @ 5V, 4 MHz

– 23 µA typical @ 3V, 32 kHz

– < 1.2 µA typical standby current

Circuit Engineering Company Limited continues to be recognized as the Southern China Leader in Services for IC Read, MCU Crack, Chip Extract, Microcontroller Unlock service. With the advancement of today’s modern circuit board technology, it is more important than ever to have specialists available to help you at a moment’s notice. Our engineering and commercial teams collectively have a vast amount of electronic experience covering field include Consumer Electronics, Industrial Automation Electronics, Wireless Communication Electronics., etc. For more information please contact us through email.


Tags: ,,,,,,,