Clone Microprocessor IC Microchip PIC16F630

We can CLONE IC Microchip PIC16F630 14-Pin FLASH-Based 8-Bit CMOS Microprocessor IC program, please view the IC chip features for your reference:

High Performance RISC CPU:

· Only 35 instructions to learn

– All single cycle instructions except branches

· Operating speed:

– DC – 20 MHz oscillator/clock input

– DC – 200 ns instruction cycle

· Interrupt capability

· 8-level deep hardware stack

· Direct, Indirect, and Relative Addressing modes

Special Microcontroller Features:

· Internal and external oscillator options

– Precision Internal 4 MHz oscillator factory

calibrated to ±1%

– External Oscillator support for crystals and resonators

5 µs wake-up from SLEEP, 3.0V, typical

· Power saving SLEEP mode

· Wide operating voltage range – 2.0V to 5.5V

· Industrial and Extended temperature range

· Low power Power-on Reset (POR)

· Power-up Timer (PWRT) and Oscillator Start-up

Timer (OST)

· Brown-out Detect (BOD)

· Watchdog Timer (WDT) with independent

oscillator for reliable operation

· Multiplexed MCLR/Input-pin

· Interrupt-on-pin change

· Individual programmable weak pull-ups

· Programmable code protection

· High Endurance FLASH/EEPROM Cell

– 100,000 write FLASH endurance

– 1,000,000 write EEPROM endurance

– FLASH/Data EEPROM Retention: > 40 years

Low Power Features:

· Standby Current:

– 1 nA @ 2.0V, typical

· Operating Current:

– 8.5 µA @ 32 kHz, 2.0V, typical

– 100 µA @ 1 MHz, 2.0V, typical

· Watchdog Timer Current

– 300 nA @ 2.0V, typical

· Timer1 oscillator current:

– 4 µA @ 32 kHz, 2.0V, typical

Peripheral Features:

· 12 I/O pins with individual direction control

· High current sink/source for direct LED drive

· Analog comparator module with:

– One analog comparator

– Programmable on-chip comparator voltage

reference (CVREF) module

– Programmable input multiplexing from device inputs

Comparator output is externally accessible

· Analog-to-Digital Converter module (PIC16F676):

– 10-bit resolution

– Programmable 8-channel input

– Voltage reference input

· Timer0: 8-bit timer/counter with 8-bit programmable prescaler

· Enhanced Timer1:

– 16-bit timer/counter with prescaler

– External Gate Input mode

– Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected

· In-Circuit Serial ProgrammingTM (ICSPTM) via two pins


Tags: ,,,,,,,,,,,,,,,,,