Break Chip ATMEL AVR ATtiny13

Break Chip ATMEL AVR ATtiny13

Break Chip ATMEL AVR ATtiny13

We can Break Chip ATMEL AVR ATtiny13, please view the MCU IC microcontroller for your reference:

Features

· High Performance, Low Power AVR® 8-Bit Microcontroller

· Advanced RISC Architecture

– 120 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation

Non-volatile Program and Data Memories

– 1K Byte of In-System Programmable Program Memory Flash

Endurance: 10,000 Write/Erase Cycles

 

– 64 Bytes In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles

– 64 Bytes Internal SRAM

– Programming Lock for Self-Programming Flash Program and EEPROM Data Security 8-bit Microcontroller

 

Peripheral Features

– One 8-bit Timer/Counter with Prescaler and Two PWM Channels

– 4-channel, 10-bit ADC with Internal Voltage Reference

– Programmable Watchdog Timer with Separate On-chip Oscillator

– On-chip Analog Comparator

Special Microcontroller Features

– debugWIRE On-chip Debug System

– In-System Programmable via SPI Port

– External and Internal Interrupt Sources

– Low Power Idle, ADC Noise Reduction, and Power-down Modes

– Enhanced Power-on Reset Circuit

– Programmable Brown-out Detection Circuit by Retrieving AVR Chip ATMEL ATtiny44

– Internal Calibrated Oscillator

I/O and Packages

– 8-pin PDIP/SOIC: Six Programmable I/O Lines

Operating Voltage:

– 1.8 – 5.5V for ATtiny13V

– 2.7 – 5.5V for ATtiny13

Speed Grade

– ATtiny13V: 0 – 6 MHz @ 1.8 – 5.5V, 0 – 12 MHz @ 2.7 – 5.5V

– ATtiny13: 0 – 12 MHz @ 2.7 – 5.5V, 0 – 24 MHz @ 4.5 – 5.5V

Industrial Temperature Range

Low Power Consumption