Break AVR Chip atmel ATTINY13 8-bit AVR Microcontroller with 1K Bytes In-System Programmable Flash

We can break atmel ATTINY13 8-bit AVR chip MicrocontrollerProgrammable Flash with 1K Bytes In-System , please view the ic features for your reference:

 

Features

· High Performance, Low Power AVR® 8-Bit Microcontroller

· Advanced RISC Architecture

– 120 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation


Non-volatile Program and Data Memories

– 1K Byte of In-System Programmable Program Memory Flash

Endurance: 10,000 Write/Erase Cycles

 

– 64 Bytes In-System Programmable EEPROM

Endurance: 100,000 Write/Erase Cycles

– 64 Bytes Internal SRAM

– Programming Lock for Self-Programming Flash Program and EEPROM Data

Security

8-bit Microcontroller

 

Peripheral Features

– One 8-bit Timer/Counter with Prescaler and Two PWM Channels

– 4-channel, 10-bit ADC with Internal Voltage Reference

– Programmable Watchdog Timer with Separate On-chip Oscillator

On-chip Analog Comparator

Special Microcontroller Features

– debugWIRE On-chip Debug System

– In-System Programmable via SPI Port

– External and Internal Interrupt Sources

– Low Power Idle, ADC Noise Reduction, and Power-down Modes

Enhanced Power-on Reset Circuit

– Programmable Brown-out Detection Circuit

– Internal Calibrated Oscillator

I/O and Packages

– 8-pin PDIP/SOIC: Six Programmable I/O Lines

Operating Voltage:

– 1.8 – 5.5V for ATtiny13V

– 2.7 – 5.5V for ATtiny13

Speed Grade

ATtiny13V: 0 – 6 MHz @ 1.8 – 5.5V, 0 – 12 MHz @ 2.7 – 5.5V

– ATtiny13: 0 – 12 MHz @ 2.7 – 5.5V, 0 – 24 MHz @ 4.5 – 5.5V

Industrial Temperature Range

Low Power Consumption

 

with 1K Bytes

In-System

Programmable

Flash

Preliminary

– Active Mode:

1 MHz, 1.8V: 240µA

Power-down Mode:

< 0.1µA at 1.8V